Raindrip R567DT Drip Irrigation Watering Kit for Vegetable Gardens Includes 50 feet of 1/4-Inch Dripline, 3/4-Inch FHT Adapter, 10 Hold-Down Stakes, 1 End Plug

The Raindrip Watering Kit for Vegetable Gardens makes it easy for any level gardener to set up a drip system. Get strong, vibrant gardens with easy-to-use components to water plants for optimal growth and overall health. The all-in-one kit includes 50 ft. of dripline (the first 15 ft. without drippers carries the water from faucet to plants); ½ GPH non-pressure compensating drippers spaced 12 in. apart & swivel adapter to connect to faucet; 10 galvanized steel stakes, & end plug to seal the end of the line. Forget hand watering with hose; save time and water with drip for a better way to water. Drip irrigation systems are easy to customize, install, and operate. The Raindrip Watering Kit for Vegetable Gardens features ¼ in. dripline, also known as a dripperline, with a 0.170 in. internal diameter (ID) and 0.250 in. outside diameter (OD), preassembled with non-pressure compensating emitters which can vary in water flow based on length of tubing or elevation, with higher flows closer to the water source. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money.

Make sure this fits by entering your model number.
Get started with drip irrigation with a kit that contains all the essentials you need to slowly water the soil around your plants for complete root zone hydration; Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows; use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system
Connect the swivel adapter preassembled on the dripline to faucet or hose bibb; position dripline near plants and stake down with included stakes; Non-Pressure Compensating Drippers have a ½ GPH flow rate
Use with a pressure regulator connected to the ¾ in. FHT X ¼ in. adapter to reduce water pressure to a manageable flow rate for drip irrigation
Kit contains everything you need to get started and installs in three steps: 1) Connect the adapter on the dripline to the water source; 2) Lay out the dripline; and 3) Stake down to hold dripline in place near your plants
Kit Includes: 50 ft. of ¼ in. tubing/dripline preassembled with ¾ in. FHT adapter; (10) hold-down stakes; (1) end plug
All fittings and drippers assembled in one easy unit, so no assembly required: just attach to water source and lay out tubing as needed
Built-in 1/2 GPH drippers are spaced every 12 inches for precision watering
Spigot fitting and plug are attached: no extra pieces needed, kit also includes 10 metal stakes for precise and secure placement
System is easily expandable using additional Raindrip products
Encourages better growth, higher yields, and uses less water than traditional methods